PURE 9010PS Manuel du propriétaire télécharger pdf (Page 15)

ONCE YOUR TRAMPOLINE IS ASSEMBLED, MOVING IT REQUIRES THAT YOU securely tape

the top rail frame joints and use a MINIMUM of 4 adults placed equidistant around the unit. Failure

to do so will result in damage to the assembly.

NEVER DRAG OR ROLL YOUR TRAMPOLINE IN ORDER TO MOVE IT!!

STEP 3 – TRAMPOLINE MAT ASSEMBLY

WARNING: Be careful where you place your hands during spring assembly as connector points can pinch!

7. Lay out the Trampoline Mat (1) inside the frame.

The Logo and Sewn Safety Label should be facing upwards. Do not remove the Safety Label from the

trampoline mat. Please refer to the following page for instructions on the order of spring installation.

HOW TO USE THE SPRING TOOL

STEP 1: (Select your spring type A or B).

Attach tool to the free end of the spring with the hook end of the tool.

STEP 2: With the spring attached, pull the tool towards the frame, extending the spring so it can be hooked

into its corresponding spring hole in the top rail frame.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Pas de commentaire

PURE 9010PS Manuel du propriétaire Page 15