PURE 9010PS Manuel du propriétaire télécharger pdf (Page 17)

STEP 5 – FRAME PAD ASSEMBLY

You will need 2 adults to assemble the frame pad to keep it even during installa-

tion.

A. Lay the Frame Pad (2) over the trampoline so that the springs and the steel frame are covered. Ensure

that the Frame Pad covers all metal parts.

B. Make sure that the stitched ap of the frame pad is able to be folded under the top rail.

C. Attach elastic bands to the tramp mat as shown below, but do NOT pull them too tight or they will

break off after a period of use. The bands require a certain amount of slack, as they are

attached to the jumping surface which will have signicant vertical movement

during use. Failure to leave slack in the bands will result in the bands tearing loose

from the pad, and/or the pad shifting off of the top rail upon use. For stability you should also

cross the band under itself when looping it around the top rail to prevent wear and tear on the stitched ends of

the elastic bands.

D.The trampoline pad should be the slightest bit loose so it “oats” a bit with movement. Keep in mind it

will require readjustment after a period of use.

E. STOP using the trampoline if it shifts during use, and have an adult readjust it.

Enclosure Parts List & Assembly Instructions on Next Page

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

Pas de commentaire

PURE 9010PS Manuel du propriétaire Page 17