Pure Evoke-2 Manuel d'utilisateur télécharger pdf (Page 22)

Technical specifications

This section lists the technical specifications for the EVOKE-2.

General Stereo DAB digital and FM radio with full Band III DAB reception capability, for reception of all UK DAB broadcasts

and full UK FM capability. Fully compliant with ETS 300 401 and capable of decoding all DAB transmission modes

1-4 up to and including 192 kb/sec. Digital DAB output, analogue stereo output and headphone socket.

Speaker Two 3 inch co-axial speakers

Frequency range DAB – Band III (174-240 MHz), with fast Autotune feature

FM – 87.5-108 MHz

Tuner sensitivity -96 dBm

Input connectors RF F-connector 75 Ω for aerial connection (telescopic aerial supplied)

9V DC power adapter socket (230V adapter supplied)

Output connectors Optical S/PDIF for digital output (DAB only) 3.5mm for stereo analogue audio output and headphones socket

Controls Power on/off, DAB/FM selector, Tune, Autotune, Display, Setup, Tone, Volume, Six preset buttons

LCD display High visibility LCD display with 16 x 2 characters

Amplifier freq range 80 Hz to 20 kHz

Amplifier power 3.4 Wrms @ 10% THD, 2.8 Wrms @ 0.1% THD

Mains power supply 230V AC to 9V DC external power adapter.

Battery power 6 size 'C' batteries. Battery life around 10 hours at ¼ volume with good quality alkaline batteries.

Approvals CE marked. Compliant with the EMC and Low Voltage Directives (89/336/EEC and 73/23/EEC)

Dimensions 290 mm (width) x 212 mm (height) x 100 mm (depth)

1 2 ... 17 18 19 20 21 22 23 24

Pas de commentaire

Pure Evoke-2 Manuel d'utilisateur Page 22